Skip to main content

No internet at all: the licence file

Normally the model computer checks in with Anava once a week to renew licences. Some sites allow no route to the internet at all, not even for that one computer. For those sites we send the licence as a file, and you load it by hand.

Everything else about Local is the same: the same cameras, the same Local link, the same model, the same limits.

How it works​

  1. Tell us your cameras. Send us the serial number of each camera. Talk to us.
  2. We sign a licence file for those serial numbers. It lasts 13 months.
  3. You carry the file in and load it on the model computer.
  4. The cameras pick it up from the link, the same way they pick up any licence.
  5. We send the next file 60 days before the old one ends. You load it the same way.

What it costs​

It is paid by the year. Ask us for the terms.

Load the file​

Copy the licence file to the model computer. Then:

sudo anava-local-gateway licence add --config "<state dir>/gateway.json" LICENCE-FILE
sudo anava-local-gateway licence list --config "<state dir>/gateway.json"

Put the path of the licence file in place of LICENCE-FILE. On Windows, leave off sudo and use an administrator PowerShell. <state dir> is the settings folder for your system, listed in Requirements.

licence list shows each camera's serial number and the date its licence ends. A newer file replaces an older one. One file can cover many cameras.

A camera picks its licence up from the link within a few hours. A camera that holds no valid licence asks every hour.

Set the cameras' clocks​

A camera with the wrong date refuses a valid licence. A camera with no internet cannot set its own clock from a public time server.

  • Give the cameras a time server on your own network, or set the time by hand on each camera (System > Date and time).
  • Check the date after a camera has been without power for a long time.
  • If a camera says it has no licence and licence list shows one for it, check the camera's clock first.

Installing with no internet​

The computer needs four things carried in from a computer that does have internet:

  • The Local link. Download it on a connected computer and carry it over. Ask us for the offline install steps when you ask for the licence.
  • Ollama. Use Ollama's own installer for your system.
  • The model. Follow Ollama's instructions for moving a model to a computer with no internet.
  • Anava Edge for the cameras. Download it from anava.ai/download and install it from AXIS Device Manager or each camera's own web page.

Pairing is the same as on any Local site: make a connection file for each camera and import it on that camera. See Licence and cameras.

Every step below is done by hand on the model computer.

What you take on​

  • Renewal is yours to do. The licences do not renew by themselves. If the new file is not loaded before the old one ends, the AI stops until it is.
  • Adding a camera means a new file. Send us the new serial number.
  • Every limit of Local still applies. See What you take on.

Related: Edge Local overview · anava.ai/edge/local